Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don’t change the page numbering. Keep the
language integrity.
9
SC RG 310 - 090223
Assembly page 9/9
Fax +32 2 359 95 50
(*)
Competent qualified electrician: after sales department of the producer or importer or any
person who is qualified, approved and competent to perform this kind of repairs in order to
avoid all danger. In any case you should return the appliance to this electrician.
IMPORTANT INFORMATION
This appliance is not for professional use. You should follow the requested breaks. Failure to
follow this instruction carefully may result in damage to the motor. Please refer to the rating
label for the maximum continuous usage time (KB xx min where xx is the maximum usage time).
The breaks should last at least 10 minutes.
ASSEMBLING
•
Make sure that the switch is in "0" position, and that the appliance is unplugged.
•
Beaters/Hooks: Insert the beaters/hooks under the body of the mixer and turn slightly until
you hear a clicking sound.
•
When mounting the hooks, watch the mark next to the openings. Large circle – dough
hook with ring.
•
Press the ejection button on top of the mixer to release accessories.
Assembling the mixer on the base and bowl
•
Make sure that the appliance is switched off and unplugged from the power supply.
•
Put the arm of the base in horizontal position and slot the appliance into it. By pushing on
the back of the appliance, the appliance can be fixed tightly onto the arm of the base.
•
Press the release button of the base and bring the arm of the base together with the
appliance in a oblique position. Tip the arm of the base as far as you can until you hear a
click. Now you can insert the accessories (dough hooks or beaters). Please make sure to
insert the dough hooks correctly (see drawing next to the openings).
•
Put the arm of the base back in its horizontal position by pressing its release button again.
•
You can now plug in the appliance and select a lower speed. The bowl turns
automatically.
Assembling the stick attachment
•
Place the switch to the position “0” and unplug the appliance.
•
Pay attention that the other accessories are to be removed from the appliance.
•
Open the valve on the bottom of the appliance. Then you will see the opening for the
stick attachment
•
Place the stick attachment in the opening so that both shafts, the one on the appliance
and the other one on the stick attachment are facing each other. Turn the stick
attachment 90° clockwise until it stops.
•
To disassemble the stick attachment, switch off the appliance and unplug it.
•
Turn the stick attachment anticlockwise and take it away from the appliance. And then
replace the valve on the opening at the bottom of the appliance.
USE OF THE STICK ATTACHMENT
The stick attachment can be used to:
−
mix liquids (milk, juice, yoghurt …)
−
blend soup or tomatoes
−
make mayonnaise, remolade.
