8
9
FIELDBEE AS STANDALONE SENSOR
The accuracy of the system will be below 1 meter and approximately
20-50 cm pass-to-pass. The system can be used for tracking and performing
operations that do not require high accuracy, for example spraying, or parallel
driving with wide implements.
Configuration
1.
On your Android device turn on the Bluetooth .
2.
Open the FieldBee app
.
3.
Skip Base station configuration by answering «I only have a FieldBee» to «Do You
have RTK Bee Station?» question.
4.
Turn On FieldBee by pressing the Power button.
5.
Wait until the antenna name will appear on the screen if it is not found - press
refresh button to restart the scan.
a.
You may see a prompt requesting to turn on the Bluetooth, answer «Yes/OK» to
continue.
b.
You may see a prompt requesting Location Permission, it is required to make
Bluetooth device scan, answer «Yes/OK» to continue.
c.
If you have more than one FieldBee or RTK Bee Station you can look at the serial
number marked on the sticker on the bottom of the antenna and match it with
the name that appears on the screen.
6.
Choose the antenna from the list.
a.
When doing this first time you will see pairing request, answer «Yes/OK» to
continue.
7.
You will see a screen with antenna status:
1
Antenna name, connection status
(Connecting... / Connected / Disconnected)
2
Serial number and version, use this information
when contacting eFarmer support.
3
Battery level and charger status.
4
Working mode status.
5
Positioning quality: type of GPS fix and
accuracy in meters, lower value - greater
accuracy.
6
Distance to base station: not relevant
7
Satellite count: number of visible GPS and
GLONASS satellites, more satellites - better
conditions, the value can vary from the amount
of satellites used for calculating location.
CONFIGURATION
Screen from FieldBee
app with antenna status
3
5
1
2
6
7
4
