EFA breastbone cutter Z 10 D
Translation of the operating instructions
EN
V 05.2021
11 of 21
4
Transport and storage
The machine has been tested and carefully checked in our factory before shipment.
The test ensures that the machine is working properly.
Despite all care taken, there is a possibility that the machine could be damaged during transport.
Therefore, check the machine for possible transport damage when unpacking it.
Warning
!
Safety instruction!
Do not remove the cutting edge
guard (if installed) until just before
start-up.
Unpacking the machine
Remove all packaging materials and dispose of them in a professional and environmentally friendly manner.
Check the machine for possible transport damage.
Information on
disposal and recycling
can be found in
section 8
.
Storage of the machine
For safe storage of the machine, it is essential to observe the following instructions:
– Only store the machine in a dry, ventilated room.
– Only store the machine in a dry condition.
– Protect the machine from corrosion.
