15
Fine-tuning P1-P9
For each hour of the day (0-24) in a program (P1-P9), you can modify the
heating mode: Comfort, Eco or Frost Watch. To fine-tune one of P1-P9,
proceed as follows:
1. Activate the program you wish to fine-tune (see ‘Program Mode’ above).
2. Press and hold button
until the time digits in the top left of the display
show
00:00
.
3. Use buttons
to cycle through the hours and select the hour to fine-
tune: the selected hour will be displayed in the time digits (00:00 – 23:00)
and flash in the program time bar (0-24).
4. For each selected hour that you wish to change the mode for: use button
to cycle to either Comfort, Eco or Frost Watch mode.
Weekly Program Schedule Mode
The weekly program schedule allows you to program the radiator, taking into
account any differences in your weekday and weekend habits:
1. Briefly press button
: the middle panel of the display will start flashing
slowly.
2. Use buttons
to cycle through the available modes, select
AU
,
and wait until the middle panel has stopped flashing slowly: the
Weekly
Program Schedule Mode
is now activated.
3. Press and hold button
until the time digits in the top left of the display
disappear and the middle panel of the display starts flashing quickly.
4. The number 1 (indicating Monday) should be visible in the middle box on
the left-hand side of the display.
5. Use buttons
to scroll through the preset programs from P1 to P9.
When the desired program has been selected, press button
to cycle
through to Tuesday (number
2
). Repeat until you have a schedule for the
whole week: Monday (1) till Sunday (7).