14
Program Mode
1. Briefly press button
: the middle panel of the display will start flashing
slowly.
2. Use buttons
to cycle through the available modes:
Fr
(Free
Operating Mode),
P1-P9
(Program Mode for one of the preset programs P1-
P9),
AU
(Weekly Program Schedule Mode),
FO
(Open Window Mode).
3. Select one of
P1-P9
and wait until the middle panel has stopped flashing
slowly: the selected preset program is now activated.
Please note: the radiator may first need to be unlocked (see ‘Unlocking the
radiator’ above).
Changing the default Comfort and Eco temperature settings
When the radiator is in Program Mode (P1-P9) or Weekly Program Schedule
Mode (AU), you can change the default Comfort and Eco temperature settings
as follows:
1. Press and hold button
a few seconds until the temperature indicator
flashes with the Comfort icon highlighted.
2. For changing Eco temperature, briefly press button
again so that Eco
icon is highlighted.
3. Use buttons
to select the desired temperature setting for Comfort or Eco.
4. Wait until the temperature indicator has stopped flashing: the selected
Comfort or Eco temperature is now set.
Preset programs P1-P9
The radiator can be programmed to provide a customized 24-hour heating
schedule. To keep things simple, the radiator comes with 9 preset programs
to choose from (see ‘THE 9 PRESET PROGRAMS’ below).
The time is indicated on the display in hourly increments: from midnight to
midnight (0-24), one bar per hour. A full bar represents an hour of Comfort
temperature, a half bar represents an hour of Eco temperature and an empty
(blank) bar represents an hour of Frost Watch temperature. A flashing bar
indicates the present hour.
The preset programs are provided to make things easier for you. However,
these programs remain 100% customizable.