18
9- USER INTERFACE
TankBuddy™ Features
List of Menu Options Provided by the Software (Clarified Below and on Following Page):
Inlet/Outlet Temperature Reading
Active Unit in Operation
Activation Temperature
Max Temperature
Software Version
Primary Menu Cycle Screens
Turn the control knob in either direction to cycle through menu options.
Inlet/Outlet Temperature Reading
The temperature of the water going in and out of the TankBuddy™ can be
observed from this display.
Active Unit in Operation
This screen will tell the user which heating unit is operating at that given
point in time. It will either be the pre-existing water tank (“TANK”) or the
TankBuddy™ (“UNIT”).
Flow
The flow screen will tell the user the amount of water that is flowing
through the unit in gallons per minute.
Load Factor
Here you can see how hard your TankBuddy™ is working.
Clock
Set the time here (HOURS:MINUTES:SECONDS). Press the knob to cycle
through hours, minutes, seconds and turn the knob to adjust the number.
IN 71 F
OUT 69 F
TANK OFF
UNIT ON
FLOW
0.00 GPM
PWM
88%
CLOCK
01:23:57
