HD490 AFD Software
3
Using the HD490 AFD Software
3.1
Connecting to the Web-based Configuration
Initial configuration of the AFD software tool is accessed through the
HD490 web-browser configuration page hosted on your encoder.
1. To access the configuration page, use a standard Ethernet cable
on the rear panel to connect your HD490 encoder to your local
network.
2. Use the front panel LCD screen and button pad to set the HD490
IP address and subnet mask. These must be valid settings for your
network, or you will not be able to communicate with the encoder.
3. Access the encoder’s web configuration pages from any PC on the
same local network by typing the IP address you assigned to the
encoder into a web browser.
4. From the main configuration page, there will be links to all of your
installed modules along the top bar. Click the top panel link labeled
‘AFD.’
5. The AFD configuration page you will see is shown in Figure 1.
4
Copyright © EEG Enterprises, Inc. 2009-2011
