HD1492 HD Encoder Frame Card
3.2.1
System
The System tab contains network configuration and general setup fields.
MAC Address
Displays the encoder’s MAC address.
Configuration
Selects between static and DHCP network
settings.
IP Address
Selects the IP address the unit will be as-
signed on your LAN (read-only in DHCP
mode).
Subnet Mask
Selects the bit mask used; this should
match the mask used on your LAN (read-
only in DHCP mode).
Gateway
Selects the address of the device that the
unit will use to communicate outside of
your LAN (read-only in DHCP mode).
Serial Port P1 Mode
Selects the signaling mode used by the P1
serial port; options are RS-232, Sony-style
RS-422, and EEG-style RS-422.
Timecode Source
Selects the timecode source for any appli-
cations requiring it; options are ANC VITC,
DVITC Master, and DVITC Aux.
11
