3. The maximum water injection rate shall be lower than the maximum scale indicated on the
water box.
Water taking and drinking:
1. Push the handle to inner side by using the water glass;
2. The water flows out when the handle is pushed to inner side; and the outflow stops when the
handle returns to the original place.
Attentions:
1. If the water in the water tank is not used for long period, then it is suggested that the water in
water dispenser shall be drained and then the clean drinking water shall be added;
2. If the water dispenser is used for the first time, or it has been kept unused for long period, then
it needs to be disassembled and cleaned before water taking and drinking;
3. In case of failure of water taking, please inspect if the water box is normally located on its base.
Instructions for water dispenser disassembly and cleaning
I. Disassembly
1. Take out the water tank components
To pull out the water tank components in the direction of 45° of oblique upward by hands that are
closely attached on the two sides of the water tank components, when the lower parts of water
tank components are separated from the water valve components, the water tank components can
be taken out through horizontal movement (to the direction of user);
Attentions:
Make sure that the water tank is empty before moving it.
2. Disassembly of water valve components
