EDX Mag Drill EM16, Руководство пользователя

Страница: 13 / 18

13
THE GIBS (DOVETAIL SLIDES)
The gibes require adjustment if too loose. To adjust, loosen the lock
nuts and adjust the adjustor screws evenly while moving the handle
up and down. Adjust so that there is no free play, yet any binding
anywhere in its range of travel. Then retighten the lock nuts.
Periodically check, lubricate, and adjust as needed.
PORTABLE MAGNETIC CORE DRILLING SYSTEM
THE CARBON BRUSHES
The carbon brushes are a normal wearing part and must be replaced when they reach their
wear limit.
Caution: Always replace the brushes as a pair.
To replace:
1. Remove the 4 screws and remove the motor tail cover.
2. Using pliers rotate the brush spring out of the way and slide
the old carbon brush out of the brush holder.
3. Unscrew the screw to remove the brush lead. The old
carbon brush may now be lifted away.
4. Install a new brush. Installation is the reverse of removal.
5. Replace the motor tail cover.
AUTO STOP CARBON BRUSH
Due to the new auto stop carbon brush if the machine comes
to a stop without any reason, the brushes have to be
checked. The auto feature stops the machine before the
carbon brushes are finished and protects the motor.
Tention
Spring
Brush
Holder
Auto Stop
Carbon
Brush