Figure 14 Extract the bearing
CS
/528
6/
A
1
2
7
5
6
3
4
1.
Take the ball bearing extractor tool and turn the knurled screw out by approx. 20
mm. Press the claws out of the plastic sleeve and spread the claws.
2.
Insert the ball bearing extractor tool into the pump until it blocks.
3.
Push the plastic sleeve down until it blocks.
4.
Turn the knurled screw until the bearing is pulled off the shaft.
5.
Remove the bearing.
6.
Push the knurled screw into the plastic sleeve.
7.
Take the bearing away.
06/2021 - ©Edwards Limited
Page 18
300872820_002_C2
B8J203880_C
300872820_002_C2 - Disassembly
