Edwards ELD500 Series, Инструкция по эксплуатации

Страница: 20 / 121

D13510840D - RC Remote control
Page 10
RJ25 socket
The RJ25 socket is located at the underside of the ELD500 RC and closed with a protective
plug when delivered.
Figure 5 RJ25 socket on the bottom of the remote control
Connections on the side
Figure 6 Connections on the side (without cover)
Note:
The IP42 safety class can only be guaranteed if the covers are closed.
Note:
Leave the protective plug in the socket when the cable is not connected.
Note:
We recommend only inserting and removing the RJ25 plug as often as is necessary for
operation.
Note:
Fold the protective strip upwards before connecting a plug (not shown).
1 USB connection
Insert the USB stick (FAT formatted) to record data.
2 3.5 mm jack for stereo headphones
Standard stereo headphones with a 3.5 mm jack plug and
> 2 x 32 Ohm impedance can be connected to the jack.
If the headphones are inserted, the volume of the
integrated loudspeaker is automatically lowered.
3 Charging socket for the enclosed power supply.