Edwards 9773512584, Инструкция по эксплуатации

Страница: 159 / 180

157,28,19,42,0,72,121,35,0
In this example:
157 indicates a pump controller
28 indicates a GXS pump family
19 indicates a GXS250
42 indicates a GXB2600 booster
0 indicates GXS screw pump
72 indicates low volts, 7.5 kW DP and 7.5 kW BP
121 indicates a harsh gas module
35 indicates a normal thermal management type
0 indicates a normal exhaust type
Refer to the SIM manual for more information about the various field elements and
what they mean for the GXS.
9.13 How to use SIM protocol with a serial port
SIM protocol is used as a means of communication between our vacuum pumps and
other external control and monitoring equipment. For more information about SIM
protocol, refer to the SIM protocol manual P41100200.
To use SIM protocol by a serial port, connect the GXS to the computer as described in
Connecting the GXS dry pumping system for serial communications Connecting the dry
pumping system for serial communications on page 53. Start the program HyperTerminal
on the computer and select the COM port to be used. Then configure the COM port to
the following settings:
Table 53
COM port settings
COM port Requirements
Bits per second 9600
Data bits 8
Parity None
Stop bits 1
Flow control None
Next, set the ASCII settings as follows:
Page 155
M58800880_H - Pump display terminal