EDVOTEK® • 1.800.EDVOTEK (1.800.338.6835) • FAX: (301) 340.0582
www.edvotek.com • [email protected]
8
RUN SAVED PROGRAM
This option will run the last program entered.
1.
Scroll to
RUN SAVED PROGRAM
and press the enter button. The last program entered will begin
cycling.
PAUSE or ESCAPE
Use this option to pause or end a program.
1.
While a program is running, push PAUSE to temporarily hold a cycle at a certain point. USE
EXTREME CAUTION WHEN OPENING THE LID AND REMOVING SAMPLES FROM THE BLOCK – THE
HEATED LID AND BLOCK WILL BE VERY HOT.
2.
When ready to return to the program, replace samples to the block, close the lid and push the
RUN button.
3.
To stop the program while it is running, press the escape button. Press the up or down button to
YES and press enter to abort the program.
If at any point the unit freezes-up, turn power off at the switch located at the back, wait a few
minutes to allow the unit to cool, and turn it back on.
