Visit our website at
www.edvotek.com
OPERATION MANUAL
EDGE
™
Integrated Electrophoresis System
2
Introduction:
The Edvotek®
EDGE™ Integrated Electrophoresis System combines an electrophoresis apparatus, power
supply, and blue light transilluminator into a single, user-friendly unit.
Warnings:
•
Use only appropriate electrophoresis buffers in
the chamber. Improper buffers can lead to dam
-
age to the power supply and electrodes and can
risk electric shock to the user.
•
DO NOT open the outer housing of the EDGE,
modify, or circumvent the safety features of the
unit. This product should only be disassembled or
serviced by properly trained professionals.
•
While the light wavelengths emitted by this prod-
uct do not require specialized eyewear, the blue
light is high intensity. DO NOT stare at the blue
lights for a long period without the orange lid in
place.
•
DO NOT submerge the outer housing of the
EDGE™ or pour liquids onto the unit.
•
Wear gloves and follow all manufacturer recom-
mendations when working with DNA stains
•
At all times, USE COMMON SENSE.
Each EDGE™ Includes:
(1)
EDGE™ base unit with integrated 100V and 150V power
supply, hinged lid, and blue light transilluminator.
(2)
EDGE™ buffer tank
with stainless steel and platinum
electrodes.
(3)
EDGE™ accessories: 10 x 7 cm gel tray, two dual-sided
combs (6- and 8-well) and two casting endcaps.
The EDGE™ has been designed for safety and convenience. A
hinged lid and dual safety cutoff switches help to prevent im
-
proper use and minimize the risk of electric shock. The blue
light transilluminator allows users to monitor DNA migration
throughout the experiment using SYBR® Safe or similar
stains, without the hazards associated with UV light.
(1)
(2)
(3)
A built-in power supply allows users to select between 100V and 150V, producing results in as little as 10 minutes.
The integrated timer can be set between 1 and 99 minutes to automatically turn off the power. Gels can be cast
with one or two combs, providing up to 16 wells in a single run.
User Maintenance:
Before cleaning your unit, ALWAYS disconnect the
cord to prevent electric shock. The EDGE™ base can
be cleaned by wiping with a lightly damp, soapy cloth.
Care should be exercised to prevent water from
running inside the unit. Do not use abrasive cleaners
or strong solvents. The buffer chamber, tray, combs,
and endcaps can be fully submerged to clean with mild
detergent if necessary. Avoid direct contact with the
positive and negative electrodes. Dry everything fully
before storage.
In the unlikely event that you experience any problems
with your unit that cannot easily be remedied, please
contact EDVOTEK® to explain the problem and obtain a
Return Goods Authorization #. After obtaining the RGA
#, return the unit if necessary and include any details of
the fault observed. Remember to return the unit in its
original packing. EDVOTEK® accepts no responsibility
for damage to units that are not properly packed for
shipping.
