4
8.
Click on the “Module setup” button located on
the anemometer sensor icon in the module
window to change the sensor settings if need be.
9.
Click on the "experiment set up button" to change
the experiment settings if need be (experiment
duration for example).
10.
The anemometer sensor will give a live reading
in the box to the left of the screen while plugged
in.
11.
To run an experiment and collect data click “Run
experiment”.
12.
To end data collection early, click “Stop
experiment”.
Tablet, smart phone device
Materials needed:
900-260 Anemometer Sensor
900-268 WiFi module
900-215 Battery
Your anemometer sensor needs to be connected to a
900-268 module. The 900-268 module will create a
closed Edu-Logger WiFi network which will stream
the Edu-Logger data to a device of your choosing.
Once your device is wirelessly connected to the Edu-
Logger network you can run experiments and collect
data through a browser of your choosing.
Procedure:
1.
Connect the anemometer sensor directly to the
left side 900-268 (no wires required).
2.
Connect a 900-215 module to the right side of the
900-268 module.
3.
Although not required, we recommend plugging
the 900-215 to an outlet using a USB to mini
USB charger (such as a typical cell phone
