4
automatically identified and you can begin
experimentation.
7.
If the spirometer sensor is not automatically
identified then click the “Search for sensors” icon
to find the sensor.
8.
Click on the “On-line experiment” button; this
will open a graph below.
9.
Click on the “Module setup” button located on
the spirometer sensor icon in the module window
to change the sensor settings if need be.
10.
Click on the "experiment set up" button to change
the experiment settings if need be (experiment
duration for example).
11.
The spirometer sensor will give a live reading in
the box to the left of the screen while plugged in.
12.
To run an experiment and collect data click “Run
experiment”.
13.
To end data collection early, click “Stop
experiment”.
Tablet, smart phone device
Materials needed:
900-226 Spirometer Sensor
Laminated Paper (included)
900-268 WiFi module
900-215 Battery
Your spirometer sensor needs to be connected to a
900-268 module. The 900-268 module will create a
closed Edu-Logger WiFi network which will stream
the Edu-Logger data to a device of your choosing.
Once your device is wirelessly connected to the Edu-
Logger network you can run experiments and collect
data through a browser of your choosing.
Procedure: