4
8.
Click on the “Module setup” button located on
the light sensor icon in the module window to
change the sensor's settings if need be.
9.
Click on the experiment set up button to change
the experiment settings if need be (experiment
duration for example).
10.
The light sensor will give a live reading in the
box to the left of the screen while plugged in.
11.
To run an experiment and collect data either click
“Run experiment”.
12.
To end data collection early, click “Stop
experiment”.
Tablet, smart phone device
Materials needed:
900-204 Light Sensor
900-268 WiFi Module
900-215 Battery Module
Your light sensor needs to be connected to a 900-268
module. The 900-268 module will create a closed
Edu-Logger WiFi network which will stream the Edu-
Logger data to the device of your choosing. Once your
device is wirelessly connected to the Edu-Logger
network you can run experiments and collect data
through a browser of your choosing.
Procedure:
1.
Connect the light sensor directly to the left side
of a 900-268 module (no wires required).
2.
Connect a 900-215 module to the right side of the
900-268 module.
3.
Although not required, we recommend plugging
the 900-215 to an outlet using a USB to mini
USB charger (such as a typical cell phone
charger). The 900-268 module will run for 15-75
