Setting Up
The instrument can be used on battery or AC power. It is not neces
sary to remove the batte1y before transfe1Ting to AC power.
AC Operation
•
Only use the approved power adaptor supplied
•
Check that the adaptor is the correct voltage for your power
supply
•
Plug the adaptor into the power socket at the back of the
meter, then connect to the AC supply.
Battery Installation
•
Approximately 24 hours of continuous use is afforded by
the 9V batte1y.
•
The BAT flag appears on the display to indicate a low
batte1y.
•
To install or replace the battery, slide off the back cover
•
Remove the old battery and inse1t a new one ensuring that
the polarity is correct
•
Replace back cover.
Power &x:ket ___________ _
•
Figure 1. Bottom view of instrument showing power co1111ectio11s
3
