Instruction manual
ES
PT
EN
FR
ref. 32508
12
INSTALATION
▶
All wiring should be done by a qualified electrican according to the
regulations of your country.
▶
Always take into account all the specifications of the appliance.
▶
Always take into account all the specifications of the appliance.
▶
Ensure that you don’t drill though electrical wire or any other
obstruction in the wall or ceiling during installation.
▶
Electrical wiring may never be clamped or twisted between the
luminary and the mounting surface..
▶
Light connections to the network: make certain the lighting circuit is
connected correctly to the installation wiring.
▶
Distance the connections and wires from the light’s hot points.
▶
Do not place wires on top of the light nor the equipment due to
possible problems with the temperature.
IMPORTANT
▶
Do not install the luminary on sufaces that are moist, dreshly
painted or electrically conductive.
▶
All luminaries without special protection against dust or moisture
(no IP rating) may be used indoors, except in bathrooms.
▶
The manufacturer advises the correct use of light-fittings. Therefore
always follow these instructions to ensure the correct and safe
installation and functioning of the fittings and keep the instructions
safe for future reference.
▶
The internal or external manipulation of the luminary may reduce it’s
safety. The manufacture can’t be held liable for any mainupulation
carried out by the use.
MAINTENANCE AND CLEANING
▶
The light must be disconnected and cold before cleaning.
▶
The light must be cleaned with a soft, damp cloth, preventing the
electrical parts from coming into contact with liquids. Do not use
dissolvents or abrasive substance. Use normal neutral PH detergent.
INSTALLATION INSTRUCTIONS
Note
▶
Installation only by persons with electro technical knowledge and
experience.
▶
Use cable wich is suitable for outdoor use (if mounted outside).
▶
Do not use a dimmer to operate this luminaire.
SPECS
▶
Máx. 16W (1.100 LUMENS)
▶
Power supply: 220-240V / AC.
▶
Power frequency: 50 / 60Hz.
▶
Ambient light: <3-2000LUX (adjustable).
▶
Delay time: Min.10sec ± 3sec / Max.5min ± 1min.
▶
Rated load: 10W (750LM).
▶
Detection range: 140°
▶
Detection distance: max.9m (<24ºC)
▶
Working temperature: -20 ~ +40ºC
▶
Working humidity: <93% RH
▶
Installation height: 1.8-2.5m
▶
Motion Detection Speed: 0.6-1.5m/s
FUNCTION
▶
Can identify day and night: You can adjust the operation in different
ambient light. It can work during the day and at night when set to
the “sun” (maximum) position. It can work as ambient light less than
3 LUX when set to “moon” (minimum) position. As for the parental
setting, please refer to the test pattern.
▶
When the sensor identifies a person, the light’s running time will be
