Congratulations on purchasing an EDISON progressive HD c+
Please note that this information is valid at the time of publication.
Current information and detailed user manuals can be found on the Internet at: www.edision.gr
Unpacking
Connecting and switching on
Remote control with 2 AAA batteries
Documentation
Service note
1
2
USB
progressiv HD c
+
W
eb
TV
OP
TIO
N
AU
DIO
TX
T
RE
C
ZO
OM
DC-12V
AV
HDMI
LNB IN 13/18V
400mA Max
IR
DC-12V
AV
HDMI
LNB IN 13/18V
400mA Max
IR
1
HDMI in
2
HD
m
i
kabel
HDMI
kabel
Antenna cable
Receiver progressive HD c+
Notes:
The front is factory fitted with a protective foil
which can be removed easily and with caution. (Protective foil only for devices with display)
The scope of delivery may also include parts not listed here
Front Panel
1
/USB: Connection for USB1 storage devices
2 Infrared sensor for the reception of remote
control commands
Back Panel
3 LNB IN: Connection for the coaxial cable
to the signal from the satellite system
4 HDMI: Connection to an HDTV quality TV
5 IR IN: Infrared connection port
6 AV OUT: For broadcasting video and sound signals
7 Connection for an adapter (DC 12V/2A)
Subpage
8 Card reader
Note: For interference-free satellite TV reception,
a specialist technician must calibrate your satellite
TV system with a digital TV level meter
• Connect the receiver using HDMI cable via the
HDMI output port to your TV’s HDMI input port
• Now connect the receiver to the satellite
antenna cable via the LNB IN input.
• Insert the batteries into the remote control.
Notes on the remote control can be found on
the back of these instructions.
• Connect the receiver to the power supply.
• The receiver starts with the BOOT process and
is operational within a short time
2
1
3
4
5
6
7
Please contact
your EDISION
specialist dealer
for any further
support
and service.
Power socket
HDMI: Output receiver
HDMI cable
TV set connection panel
Use an HDMI input!
LNB IN: Connecting
the cable to the satellite
signal
progressiv HD c+
F u l l H D S AT R e c e i v e r
24mm
75mm
115mm
8
