6
►CONNECTIΟΝ & OPERATION
1. Connect an HDMI cable from HDMI source device to the “HD in” of HD Modulator.
2. Connect an RF coaxial cable to the “RF OUT” output for signal distribution to the RF
network.
3. Connect the power adapter to the HD Modulator.
4. Select configuration signals from the MENU TV STANDARD (STAN) between
DVB-C, DVB-T or ISDB-T
5. Select an output frequency or channel.
6. If you have more than one HD Modulator in the same installation, select a different ID
for each modulator.
7. Proceed with channel scanning on your TV/STB.