2. Please charge the light and set the button on OFF state for 2-3 days to make
sure charge the battery fully before first using this light.
3. The motion sensor is very sensitive for the light. In order to get the best
performance at night, please check that there have no other light to interfere
this motion sensor, to ensure that the sensor in working properly.
4. When the lights turn on, please do not look directly at this LED solar lights,
avoid to cause any damage to the eyes.
5. The recommend installation height is about 4.93 to 10.5 ft. Please get help
with others to install this solar motion light when you use step ladder. If
you don’t know how to install, please find an electrician or professional.
1. Place the mounting socket to the position you want and mark the screw points
in the holes. Use an electric drill and screwdriver to secure the mounting
socket to the selected surface. If you install it on a brick or other hard wall
panel, please use a 1/4 inch drill bit to pre-drill the screw anchors.
(recommended installation height is about 4.93 to 10.5 ft from the ground)
Installation
