4K Ultra HD Camera With Autofocus User Manual
16
B. RTSP Port
Network camera support RTSP protocol,
use the VLC tools broadcast.
C. PTZ Port
Support PTZ protocol, default port: 5678.
3) Control Protocol Settings
Setting camera control communication
protocol, include Visca address, Pelco-D
address and Pelco-P address.
4) RTMP Settings
Setting the camera stream, can set up two
stream, in the two stream selection control
code stream of “On”, “Off”, “Video”, “Audio”.
5) RTSP Settings
Turn On/Off RTSP auth.
6) ONVIF Settings
Turn On/Off ONVIF and ONVIF auth.
7) Multicast Settings
Turn On/Off multicast. Setting multicast
address (default value is 224.1.2.3) and port
(default value is 6688).
8) SDK Settings
Turn On/Off active connection. Setting SDK
address (default value is 192.168.100.138)
and port (default value is 1234).
6.6.7 Device Information
Show the current device information, as
shown below.
6.7 Download the Camera
Upgrade Program
If you need the camera upgrade program,
please contact the manufacturer.
7
Maintenance and
Troubleshooting
Camera Maintains
If camera will not be used for a long time,
please turn off the power switch,
disconnect AC power cord of AC adaptor
to the outlet.
Use soft cloth or tissue to clean the
camera cover.
Please use the soft dry cloth to clean the
lens. If the camera is very dirty, clean it
with diluted neuter detergent. Do not use
any type of solvents, which may
damages the surface.
Unqualified Application
No shooting extreme bright object for a
long period of time, such as sunlight,
light sources, etc.
No operating in unstable lighting
conditions, otherwise image will be
flickering.
No operating close to powerful
electromagnetic radiation, such as TV or
radio transmitters, etc.
