Edirol PCR-A30 Скачать руководство пользователя страница 79

Страница: 79 / 112

Using the PCR-A30 as a MIDI controller

●

Transmit mode

fig.edt2

Press the

[EDIT]

button.

The display will indicate “EDT”.

Press the

[BULK]

key.

fig.blt

Press the

[1]

key.

The display will blink “BLT” (Bulk Transmit).

fig.ts

Confirm what’s indicated and press the

[ENTER]

button.

The display will indicate “TS”, and the “S” will blink.

Use the

[DEC]

[INC]

buttons or the

[0]

[1]

keys to select the mode.

Confirm what’s indicated and press the

[ENTER]

button.

fig.ts-1

The third digit of the display will blink, and the PCR-A30 will wait to
transmit bulk data.

Press the

[ENTER]

button.

On your sequencer software, specify “PCR -A 2” as the MIDI input device. For details on this
setting, refer to the manual of your sequencer software.
For details on the port that will be used to transfer bulk data, refer to

“Specifying the port”

(p.

54).

fig.end

When the PCR finishes receiving the bulk data, the display will indicate
“END”.

Confirm what’s indicated and press the

[ENTER]

button.

SINGLE BULK

The currently recalled memory (the current memory)
will be transmitted as bulk data

ALL BULK

All memories (memories 1–F) will be transmitted as
bulk data.

PCR-A30_e2.book 79 ページ２００３年１０月２２日　水曜日　午後３時１９分

Содержание PCR-A30

















































































































Результаты поиска

Содержание PCR-A30

Отзывы:

Edirol PCR-A30, Руководство пользователя, Страница: 79 / 112

Результаты поиска

Содержание PCR-A30

Отзывы: