Edimax PS-1001, Руководство пользователя

Страница: 61 / 90

User's Manual
can add this address to the /etc/hosts file, by adding a line such
as:
203.66.191.12 pserver
3. Add the Ethernet address and the host name for the PrintSir to
the /etc/ethers file, by adding a line such as:
00:00:B4:01:01:01 pserver
Where the Ethernet address of the PrintSir is the Node ID
located on the PrintSir.
4. If your system uses Network Information Services (NIS), you
will need to make changes to the NIS host and ethers databases.
5. Check if the RARP daemon is running using the ps and grep
commands. If the RARP daemon is not running on your host,
type “rarpd -a” to run the RARP server.
6.4 Verify PrintSir’s IP Address
To verify that your PrintSir is responding to the newly assigned IP
address using a PING command:
ping ip-address
6.5 Configure Remote lpd Printing on the Host
T h e p r o c e d u r e y o u u s e t o c o n f i g u r e your Unix host(s) to allow
printing to your network remote print server varies between different
varieties of Unix. The procedure below can be used for Unix variants that
are related to BSD Unix, such as SunOS or Linux. For other versions of
Unix, consult your system documentation, keeping in mind that:
1. The PrintSir should be treated as a BSD networked print server
host.
2. The host name should be the name (or IP address) that you
have assigned to the PrintSir.