5
3. Power switch
When the storage server is not working, switch the Power switch to “1” will
switch on the power and make the storage server start. When the storage
server has been shut down, switch the Power switch to “0” will switch off the
power.
Note: Please do not directly switch off the power when the storage server is
running. This will make some data not correctly saved in the storage server
and may make the storage server not work properly. Before switch off the
power, please press Release button for more than 5 seconds to shut down the
storage server first.
Note: If you did not switch off the power after your previous shut down (just
press Release button for more than 5 seconds) and you want to start the
storage server now, you should switch off the power first and then switch on
the power, and the storage server will start again.
Note: After you shut down the storage server and before switch off the power,
the storage server is still providing power to the hard disk drives and the hard
disk drives are still running. You have to switch off the power after you shut
down the storage server to make the whole system completely stopped.
