9
6.
Using the camera viewer
6.1. Panel
Introduction
6.1.1. Camera
buttons
Click these buttons will connect the camera that you want view and setting.
There are 4 buttons, means Camera 1,Camera 2, Camera 3 and Camera 4.
6.1.2. Camera
Status
The status field will show the camera status,
Yellow
means is not configured physical camera
into camera viewer,
Red
means the camera is connected and recording;
Blue
means the
camera is connected and playing the video,
Pink
means is disconnected with camera.
6.1.3. Change
resolution
Click the two buttons will change the resolution of camera.
Notice:
If you change the resolution of camera, others that are viewing the camera
simultaneously will change the resolution, too.
Change the resolution to 640x480 (VGA) mode.
