18
Setting screen
Maintenance
Firmware Upgrade: Click the button to upgrade the firmware.
Factory Default: Click the button will reset to default value.
Email Setting
Click apply button will capture a snapshot from video immediately and send an e-mail to
receiver.
Receiver: Mail account for receiving mail.
Mail Server: IP address/Domain name of mail server for sending mail.
IP Information
IP Address: necessary for network identification. The default value is 192.168.2.3.
Subnet mask: Used to determine if the destination is in the same subnet. The default value is
“255.255.255.0.”
Default Gateway: The router used to forward frames to destinations in a different subnet.
Invalid router settings may cause the failure of transmissions to a different subnet.
DNS Server: Domain name server that translates names to IP addresses.
Video Port Number: Video stream port number.
Control Port Number: Can be set to other than the default port 80. When the administrator
changes the HTTP port from 80 to 8080, users must type
http://192.168.2.3:8080
in the Web
browser bar.
