www.edimax.com
TECHNICAL SPECIFICATIONS
Hardware
Standards
Effect Data Rate
1 x Power jack
1 x 10/100Mbps Ethernet LAN port
1 x Group/Reset button
LED indicators: power, Ethernet, powerline
IEEE 1901
IEEE 802.3
IEEE 802.3u
TCP: Up to 95 Mbps effective throughput
UDP: Up to 95 Mbps effective throughput
Frequency Band
Modulation Schemes
Operating Range
2-68MHz (with Mask)
OFDM symbol modulation on line
synchronization 1024/256/64/16/8-QAM,
QPSK, BPSK, ROBO modulation
Up to 300 meters
QoS
Nodes
IGMP
4 levels priority based contention access,
and multi segment bursting
8 levels VLAN priority field, TOS field
QoS classification by destination MAC
address and IP port
Up to 15 slaves with 1 master, 16 total
devices
Max 8 bridged devices per station
Support for IPv4/IGMPv1,v2,v3 snooping
Support for IPv6 and MLDv1, v2 snooping
Max 16 source addresses and group
members
IC / Memory
Security
Temperature & Humidity
1540
1MB Flash
8MB SDRAM
128-bit AES link encryption with key
management
0-45 degrees Celsius
10-90% (non-condensing)
Power Source / Power Consumption
Dimensions & Weight
Certification
100-240V AC, 50-60Hz
4W
67 x 50 x 32mm
109g
CE, FCC, LVD
NETWORK SETUP DIAGRAM AND RELATED PRODUCTS
•
Plug a HP-5102 into a power outlet and connect it to a broadband router.
•
Plug another HP-5102 into a power outlet and connect it to a computer's
Ethernet port to establish a powerline connection.
Copyright © 2012 Edimax Technology Co. Ltd. All rights reserved. Maximum performance, actual data rates, and coverage will vary depending on network
conditions and environmental factors. Product specifications and design are subject to change without notice.
500Mbps Nano PowerLine Adapter Kit
HP-5102K
