Edimax GS-5210PLG, Руководство пользователя

Страница: 6 / 34

3
I-3. LED Status
II. Installation
Read the following below procedures in the correct order. Incorrect
installation may cause damage to the product.
II-1. Physically Setup
There are two ways to physically set up the switch.
1. Desktop Placement : Place
the switch on a flat surface
and install the four rubber
feet (included) on the
bottom of the switch.
Function Color Status Description
PWR Green
On Power on
Off Power off
Blinking Booting up
PoE Alert Green
On
Total PoE power consumed is
OVER PoE power budget
Off
Total PoE power consumed is
under PoE power budget
Link/ACT
(Port 1-9)
Green
On Link at 1000Mbps
Blinking Sending or receiving data
Off Port disconnected or link fail
Amber
On Link at 10/100Mbps
Blinking Sending or receiving data
Off Port disconnected or link fail
SPF
(Port 10)
Green
On Link at 1000Mbps
Blinking Sending or receiving data
Off Port disconnected or link fail
PoE
(Port 1-8)
Green
On Feeding power to PoE devices
Off PoE function is not active