40
IV-3-6
QinQ Port Config
To configure and display the QinQ Port Config, click
VLAN Configuration > QinQ Port
Config.
Figure 38 - VLAN Configuration > QinQ Port Config
Item
Description
Port Selection
Select setting port
Index
When the Index is selected, the Service Tag of that Index is
specified in QinQ Index Config webpage
Tagging
Add:
Add Service Tag to packets enter / exit the Port. If the
packets entered carries Service Tag, then modify or
replace Service Tag according to if Rx detect is enabled
RMV:
Service Tag can be removed only when Rx detect is
enabled
Rx detect
Enable / Disable the Service Tag check on packets entering
the port
Keep PCP/DEI
When modifying the Service Tag added to the packets,
specify is original PCP and DEI values are kept.
