21
Create 802.1Q VLAN
1.
VLAN NAME
: Type a name for the new VLAN (ex: V2).
2.
VLAN ID
: The VLAN ID range is 1 ~ 4094, and it’s default
VLAN group is 1.You can set up to 256 VLAN groups.
3.
Member
: Press Space key to choose VLAN member. There
are three types to selected in 802.1Q VLAN mode:
a.
NO
: this port is NOT the member of this VLAN group.
b.
Untagged
: this port is the member of this VLAN group
and outgoing frames are NO VLAN-Tagged frames.
c.
Tagged
: this port is the member of this VLAN group and
outgoing frames are VLAN-Tagged frames.
NOTE
: If the trunk group exists, you can see it (ex: TRK1,
TRK2…) after port 26, and you can configure it as the member
of the VLAN group or not.
