1
Introduction
Thanks you for purchasing our 10/100Mbps Fast
Ethernet Adapter.
This guide is to provide the
installation and usage of this adapter for network
installers and users.
The 10/100 network adapter
complies to PCI 2.1 and PCI 2.2 specification and
supports half/full duplex feature which can double
network speed.
This adapter supports both 10Mbps and 100Mbps
network speed, 100BaseTX operates on two pairs of
category 5 UTP cable and 10BaseT operates on
Category 3,4,5 UTP cable.
With the Auto-Negotiation technology, network speed
is auto detected.
When you connect the adapter to
10BaseT hub via UTP cable, the network speed
becomes 10Mbps. Similarly, if you connect the adapter
to 100BaseTX hub, the network speed is 100Mbps. If
the hub is a switching hub which supports full duplex
function,
then
the
speed
will
be
doubled
to
20Mbps/200Mbps.
Real hassle free installation is achieved by conforming
to PCI bus. Just plug in the card and all setup is done
automatically. No more software to run !
Furthermore, this adapter support the Wake On LAN
(WOL) feature allows users to configure network
adapters that are capable of “listening to” network
packets even when the computer is turned off.
This adapter supplies many drivers including ODI
driver for NetWare 3.x/4.x/5.x, NDIS driver for
MicrosoftLANManager,Windows95/98/NT/2000/Me/
XP, Linux, and a Packet Driver for TCP/IP software.
Whatever your requirements are ease of installation,
superior performance or responsive support backed up
by unlimited technical support, this adapter is the
superior choice.
1
