Edimax EDIMAX FAST ETHERNET MFP SERVER VERSION: 2.0 Скачать руководство пользователя страница 102

Страница: 102 / 118

8. To print a test page and apply all the settings, please click “Yes”.

9. If the test page is printed without problem, please click “Yes”. If it is failed

to print, please click “No” to go back to “Printer configuration - fedora”
screen and configure again.

13.2 Console Mode

To configure the MFP Server for LPD printing, perform the procedures below:

1.  Enable MFP Server’s TCP/IP Support.
2.  Set up MFP Server’s IP address.
3.  Verify MFP Server’s IP Address.
4.  Configure remote LPD printing on the host.
5.  Print a test page.

In the next sections, we will describe these five procedures step by step.

Содержание EDIMAX FAST ETHERNET MFP SERVER VERSION: 2.0























































































































Результаты поиска

Содержание EDIMAX FAST ETHERNET MFP SERVER VERSION: 2.0

Отзывы:

Похожие инструкции для EDIMAX FAST ETHERNET MFP SERVER VERSION: 2.0

Бренды по названию

Популярные бренды

Edimax EDIMAX FAST ETHERNET MFP SERVER VERSION: 2.0, Руководство пользователя

Результаты поиска

Содержание EDIMAX FAST ETHERNET MFP SERVER VERSION: 2.0

Отзывы:

Похожие инструкции для EDIMAX FAST ETHERNET MFP SERVER VERSION: 2.0

Бренды по названию

Популярные бренды