8
2e) Windows NT
1.
Click the
Start
button and select
Settings
, then click
Control Panel
. The
Control Panel
window will appear.
2.
Double-click
Network
icon. The
Network
window will appear. Select the
Protocol
tab from the
Network
window.
3.
Check if the
TCP/IP Protocol
is on your list of
Network Protocols
. If TCP/IP is not installed, click the
Add
button to
install it now. If TCP/IP is installed, go to
step 5
.
4.
In the
Select Network Protocol
window, select the
TCP/IP Protocol
and click the
Ok
button to start installing the
TCP/IP protocol. You may need your Windows CD to complete the installation.
5.
After you install TCP/IP, go back to the
Network
window. Select
TCP/IP
from the list of
Network Protocols
and then
click the
Properties
button.
6.
Check each of the tabs and verify the following settings:
•
IP Address:
Select
Obtain an IP address from a DHCP server
.
•
DNS:
Let all fields are blank.
•
WINS:
Let all fields are blank.
•
Routing:
Let all fields are blank.
7.
Click
OK
to confirm the setting. Your PC will now obtain an IP address automatically from your Broadband Router’s
DHCP server.
Note
: Please make sure that the Broadband router’s DHCP server is the only DHCP server available on your LAN.
Once you’ve configured your PC to obtain an IP address automatically, please proceed to Step 3.
3) Once you have configured your PCs to obtain an IP address automatically, the router’s DHCP server will automatically
give your LAN clients an IP address. By default the Broadband Router’s DHCP server is enabled so that you can
obtain an IP address automatically. To see if you have obtained an IP address, see Appendix A.
Note
: Please make sure that the Broadband router’s DHCP server is the only DHCP server available on your LAN. If
there is another DHCP on your network, then you’ll need to switch one of the DHCP servers off. (To disable the
Broadband router’s DHCP server see chapter 2 LAN Port)
4) Once your PC has obtained an IP address from your router, enter the default IP
address
192.168.2.1
(broadband
router’s IP address) into your PC’s web browser and press <enter>
5) The login screen below will appear. Enter the “User Name” and “Password” and then click <OK> to login.
Note:
By default the user name is “
admin
” and the password is “
1234
”. For security reasons it is recommended that you
change the password as soon as possible (in General setup/system/password, see chapter 2)
Содержание BR-6214K
Страница 1: ...BR 6214K Fast Ethernet Broadband Router User s Manual ...
Страница 41: ...40 3 2 5 New Connection Log ...
