manualshive.com logo in svg

EdilKamin WINDO2 75, Инструкция по установке, эксплуатации и обслуживанию, Страница: 7 / 20

Поделиться
Скачать
EdilKamin WINDO2 75 Скачать руководство пользователя страница 7

7

ENGLISH

INSTALLATION

DETACH THE PRODUCT FROM THE PALLET 

Detach  the  product  from  the  pallet  by  loosening  the 

Detach the product from the pallet by loosening the 
screws (A) securing it to the latter and located on the 

screws (A) securing it to the latter and located on the 
feet. Remove the product from the pallet while being 

feet. Remove the product from the pallet while being 
careful  to  protect  the  door  and  its  glass  panel  from 

careful to protect the door and its glass panel from 
mechanical impacts which could damage them.

mechanical impacts which could damage them.

SHIFTING THE PRODUCT 

The 

fi

 replace is equipped with two casters (B)for 

facilitating its handling.
Lower the feet by turning them to use the wheels.
After positioning the 

fi

 replace, reposition the feet.

The feet are used to distance the 

fi

 replace from the 

fl

 oor and to level the hearth.

They can be adjusted to maximum 10 cm.

PREPARATION AND UNPACKING

The materials composing the packaging are not toxic 

The materials composing the packaging are not toxic 
or harmful, therefore no particular disposal processes 

or harmful, therefore no particular disposal processes 
are required. 

are required. 
Storage, disposal and any recycling is the responsi-

Storage, disposal and any recycling is the responsi-
bility of the end user in compliance with the laws in 

bility of the end user in compliance with the laws in 
force on the matter.

force on the matter.

 

You are recommended to make each 
movement in a vertical position with suita-
ble devices, paying attention to the safety 
standards in force.
Do not overturn the packaging and be cau-
tious when assembling parts.

PLEASE NOTE
If the 

fi

 replace is not level there may 

be problems with the door’s sliding 
movement.

B

A

A

HANDLING RINGS

rings have been 

fi

 xed to the sides of the

hearth so as to facilitate transportation of the
monobloc. Insert two steel rodsinto the rings.

PLEASE NOTE Do not overturn 
the product

Содержание WINDO2 75





















Отзывы:

Нет отзывов