21
ENGLISH
*
USER INSTRUCTIONS
LOADING THE PELLETS INTO THE TANK.
Slide the top * to load the pellets
Product can be commissioned only after coverings installation.
Switch on the product only after complete installation including coverings. Risk of electric shock from live
device parts.
Product can be commissioned only after coverings installation.
Switch on the product only after complete installation including coverings. Risk of electric shock from live device parts.
FIRST IGNITION (COMMISSIONING) PHAS-
ES
• Make sure you have read and understood this
manual
• Remove all flammable materials from the appliance
(manuals, labels, etc.). In particular remove any
labels from the glass
• Make sure that the technician performs the first
ignition and the first loading of the pellet tank (see
“pellet loading”)
When the stove is hot, DO NOT MAKE
CONTACT between the pellet bag and the
top grille.
Use the glove when loading the stove while
it is operating and hence hot to the touch.
Make sure not to touch the smoke
discharge pipe if hot.
FUEL
Use UNI EN ISO 17225-2 category A1 wood pellets
Use UNI EN ISO 17225-2 category A1 wood pellets
or similar regulatory products with the following
or similar regulatory products with the following
characteristics.
characteristics.
diameter 6 mm
diameter 6 mm
length 3-4 cm
length 3-4 cm
humidity <10 %
humidity <10 %
For reasons of safety and environmental compatibility,
DO NOT burn plastic, painted wood, coal, bark or
other such materials in the stove.
Do not use the stove as an incinerator
Caution
Using fuels other than those specified can
damage the appliance
On first ignition, there may be a slight
smell of paint, which will disappear in a
short time.
USER
