16
MOUNTING THE COMPONENTS
Pic. 13
Pic. 14
Y
ENGLISH
Q
Pic. 16
Pic. 15
Fastening the electronic regulator
(
R
)
to the tank
The electronic regulator (
R
) is delivered already wired in its box which then must be installed in the dedicated
housing on the front of the tank and then fix the earthing cable(
P
) (Pics. 11-12) .
If installation is difficult, you can remove the lid by loosening the 4 screws.
Bring the power cable to the motor and secure it:
- to the side of the tank with the adhesive plate and clamp (Pic. 13)
- to the feeder tube support (
Y
) using the cable ties (photo 14)
Insert the plug into the motor outlet (pic. 15)
Attention: prevent the casing (Q ) - (pic. 16) from coming into contact with the gear motor blades.
Pic. 11
R
P
R
Pic. 12
