EdilKamin SCREEN EVO 100, Инструкция по установке, эксплуатации и обслуживанию, Страница: 25 / 28

25
ENGLISH
MAINTENANCE
Cleaning the glass
You can use specific products to clean the glass (see
our Glasskamin pricelist).
Do not spray the product on painted parts or the
seals of the door. An alternative to the product is a rag
soaked in a bit of white ash and a piece of newspaper.
Attention, ensure there are no abrasive elements in the
ash that could scratch the glass.
Ceramic glass installed on the products can
resist heat up to approx. 750°C and is tested
and controlled before and after assembly to
check for the presence of cracks, bubbles
and blowing.
The glass, despite its high resistance to
temperature, is however a fragile element
and therefore you are advised to move the
door cautiously without banging or forcing it.
Glass, since it is not flexible, can break.
Removing ash
Remove the ash with a scoop or ash cleaner. Place
the removed ash exclusively in non-combustible
containers; bear in mind that the residual embers may
still re-ignite 24 hours after the last combustion.
No tray for removing or emptying present.
Cleaning the external parts
The covering must be clean without using aggressive
detergents. Do not wet with cold water when the
covering is hot because the thermal shock could
cause damage.
Cleaning the chimney flue
This should be carried out before the use season and
each time you note a layer of soot and tar has formed
inside, a substance that is easily flammable.
Scale, in the presence of high temperatures and
sparks, can catch fire with serious consequences
both for the chimney flue and for the home. You are
therefore advised to clean at least once a year.
Check the local regulations.