EdilKamin PHOENIX 1115620, Руководство пользователя, Страница: 8 / 28

8
ENGLISH
In AUTOMATIC mode:
Setting the Room Temperature
(read by the remote control, which should be located in the room where the
product is installed). Modify the desired temperature using the “+” and “–” buttons.
AUTOMATIC MANUAL
Press any button and the display will activate, then press the button
With CRONO active, it is not possible on the main display to change the choice of Temperature level (T1, T2 or T3) or
the value of T1, T2 or T3. To do so, you need to access the Menu.
The or buttons are disabled.
The flashing “SET” or “MAN” symbol appears; the operating Mode symbols and the Power level and Ventilation
symbols disappear.
The Set is modified with the or buttons and the setting is confirmed with the button or by waiting
5 seconds without pressing any buttons.
USER INSTRUCTIONS
USER
USER CONTROLS ON REMOTE CONTROL
ON/OFF
Hold the ON/OFF button down to switch the product ON.
AUTOMATIC and MANUAL setting
Press the AUTO/MAN button for a few seconds to switch from manual to automatic mode or vice versa.
NOTE
or WAIT