EdilKamin Italiana Camini IDROPOINT, Инструкция по установке, эксплуатации и обслуживанию

Страница: 204 / 309

- 204
-
ENGLISH
FEATURES
ELECTRICAL FEATURES
Power supply /- 10% 50 Hz
Average power consumption 150 W
Power consumption during ignition 400 W
Motherboard protection * Fuse F4 AL, 250 Vac
The above data are indicative.
EDILKAMIN s.p.a. reserves the right to modify the products at its undisputable discretion, without notice.
THERMO-TECHNICAL FEATURES
Nominal power 11,5 kW
Nominal power transferred to the water
8,3 kW
Approx. global yield 90,1 %
CO emission (13% O
2
) 0,013 %
Max pressure 2 bar
Operating pressure
1,5 bar
Smoke output temperature
140 °C
Minimum draught 12 Pa
Min/max autonomy 5 / 18 hours
Min/max fuel consumption 0,8 / 2,7 kg/h
Pellet hopper capacity 14 kg
Volume heated * 300 m³
Weight inc. packaging 142 kg
Diameter of smoke duct (male) 80 mm
Diameter of air intake duct (male) 40 mm
*
The volume which can be heated is calculated assuming insulation pursuant to Italian law 10/91 and successive amendments and
a heat requirement of 33 Kcal/m³ hour.
* It is important to also take into consideration the position of the stove in the environment to be heated.
N.B.
1) take into consideration that external appliances can disturb the functioning of the motherboard.
2) attention: operations on live components and/or checks must only be carried out by qualified personnel.
(Before carrying out any maintenance, disconnect the appliance from the mains electricity)