EdilKamin GORA 22, Инструкция по установке, эксплуатации и обслуживанию, Страница: 39 / 44

39
ENGLISH
IN PRESENCE PELLET LEVEL SENSOR
Pellet level sensor is used to alert customer that pellet is running out and that stove will
shutdown in about half-anhour
time, showing “OFF” and “PLT” on the display.
Once installed, sensor cannot be turned off by the end user.
MESSAGE PROBLEM SOLUTION
HO7
Shut-down due to exceeding
maximum smoke temperature
• Check the type of pellet (contact the technician if in
doubt)
• contact the technician
H08
Switching OFF due to excessive
overheating of the product
• see HO7
H09
Shut down due to gear motor
breakage or seizure
• Contact the technician
H10
Switching OFF due to circuit
board overheating
• Contact the technician
H11
Switching OFF due to the inter-
vention of the safety pressure
switch
• Ensure the stove and flue are clean
• Contact the technician
H12
Room temperature probe
failure.
• Contact the technician
H13
Shut-down due to breakage of
the reading water temperature
probe of the boiler stove
• Contact the technician
H14
Shut-down due to breakage of
the water temperature probe in
the boiler
• Contact the technician
H15
Shut-down due to exceeding
maximum water temperature in
the boiler stove
• Contact the technician
H16
Shut-down due to breakage of
the pressure switch for reading
water pressure of the boiler
stove
• Contact the technician
H17
Shut down due to breakage of
external probe
• Contact the technician
H18
Shut-down due to breakage of
the water temperature probe in
the accumulator tank
• Contact the technician
TROUBLESHOOTING