EdilKamin Celia Air Tight Plus Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 60

EdilKamin Celia Air Tight Plus Скачать руководство пользователя страница 52

52

ENGLISH

In case of an alarm, an alarm code will appear instead of the room temperature.
While the product switches off, the status bar will alternately show “OFF” in large letters and the description of the
alarm in small letters.
If the alarm occurred with the timer active, only the timer’s activation arrow will remain displayed, while the day’s time
schedule will disappear.
Once the switch-off sequence terminates, only the alarm description will remain.
If problems occur, the product shuts itself off automatically.
The display will show the reason (see below).
Do not disconnect from the power supply.

To restart the product, wait for the switch-off sequence to terminate and then press the ON/OFF button

of the

remote control or the simplified switch-on button.

Before starting the product up again, check the reason for the shutdown and CLEAN the burning pot.
The product is equipped with the necessary safety devices but, if the burning pot is not cleaned regularly as explained
above, ignition may involve a slight detonation. If white smoke forms in the combustion chamber for a long time,
disconnect the mains supply and wait 30 minutes before opening the door and emptying out the burning pot.

TROUBLESHOOTING

USER/INSTALLER

alternating

SHUTDOWN MESSAGES AND THEIR SOLUTIONS:

«
...
50
51
52
53
54
...
»

Содержание Celia Air Tight Plus





























































Отзывы:

Нет отзывов