41
IT
ALIANO
Please check with the technician to have wenn understood how the product works
USER INSTRUCTIONS
USER
POSSIBLE STATUSES
of the product:
- OFF STATUS
The product is “deactivated” and will not produce heat due to manual switching off using the ON/OFF button on the
remote control or due to an external contact (timer, telephone dialler).
From the OFF page, press the ON/OFF button for 3 seconds to access the ON page.
- ON STATUS
The product is “active” and can fulfil the heating requests.
- ALARM STATUS
In case of shutdown due to alarm, the display shows the type of alarm. See the paragraph “Troubleshooting”
- ON / OFF STATUS Stand-by activated
The product is momentarily off because there are no heating requests.
While in stand-by mode, and ON, the product turns on only if there is a heat request.
If the product was operating, it switches to minimum power and waits for the set time before going off.
If the product was in the ignition phase, it completes the ignition phase and switches to minimum power and waits
for the set time before going off.
If the product was OFF and is switched to ON, the stove switches immediately to stand-by without performing the
ignition procedure.