EdilKamin BLADE H 15, Инструкция по установке, использованию и обслуживанию

Страница: 8 / 88

8
ENGLISH
TECHNICAL DATA
USER/INSTALLER
TECHNICAL DATA pursuant to EN 14785 The data shown is purely indicative and was measured during
the certification phase at notified bodies under standard conditions.
BLADE H 15
Nominal power Reduced power
Available power 15,3 3,3 kW
Power available to water 13 2,5 kW
Yield 92,1 93,2 %
CO emissions at 13% O
2
0,004 0,009 %
Smoke temperature 132 65 °C
Fuel consumption * 3,5 0,7 kg/h
Tank capacity 23 kg
Recommended draught 12 Pa
Autonomy 7 33 ore
Water content 13 l
Maximum operating pressure 3 bar
Maximum operating temperature 90 °C
Heatable volume ** 400 m
3
Smoke duct diameter 80 mm
Air intake duct diameter 50 mm
Weight including packaging 230/280 kg
Energy efficiency class (Regulation 1185/ 2015) A++
TECHNICAL DATA FOR SIZING THE FLUE
which must in any case satisfy the requirements in this sheet and the installation instructions for the product
Nominal power
BLADE H 15
Smoke temperature at smoke outlet 158 °C
Minimum draught 0,01 Pa
Smoke flow rate 9,8 g/s
EDILKAMIN S.p.A. reserves the right to modify the product at its own discretion and without
prior notice, with a view to improvements.
ELECTRICAL SPECIFICATIONS
Power supply 230 Vac +/- 10% 50 Hz
Nominal absorbed power 77 W
Reduced absorbed power 39 W
Absorbed power in stand-by mode 4 W
Power absorption during ignition 300 W
Protection rating Fusibile 4 AT, 250 Vac 5x20
* A calorific value of 4.8 kW/kg was used to calculate consumption.
** The heatable volume was calculated with a heating demand of 33 Kcal/m³ hour.
The product can work safely even with greater draught.
Excessive draught could cause the product to switch off and/or lower its performance.
The flue outlet Ø is not that of the chimney system, which must be sized in accordance with national and local stan-
dards and in particular, but not limited to, EN 13384, EN 1443, EN 1856, EN 1457.