EdilKamin 809530 Скачать руководство пользователя страница 3

3

ENGLISH

Dear Sir/Madam
Congratulations on choosing our product. Before you 
use it, please read this manual carefully, to get the best 
from your new appliance in total safety.

This manual is an integral part of the product. Please 
keep it for the entire life of the product. 
If you lose it, you can request a copy or download it 
from www.edilkamin.com

After unpacking the product, check the condition and 
completeness of the contents. 
In the event of error, immediately contact the retailer 
where the purchase was made, providing him with a 
copy of the warranty booklet and the sales receipt.

The appliance must be installed and operated in 
compliance with local and national law and European 
regulations. For the installation, and for anything not 
specifically indicated in the manual, observe local 
regulations. 

The diagrams in this manual are illustrative; they do 
not always refer specifically to your product and are 
not binding in any way.

The product is uniquely identified by a number, the 
“counterfoil”, which is indicated on the warranty 
certificate inside the product.

Please keep:
•  the warranty certificate accompanying the product
•  the purchase receipt given to you by the retailer
•  the declaration of conformity given to you by the 

installer. 

The warranty conditions are given in the warranty 
certificate accompanying the product.

We recommend that the appliance be started up for 
the first time (commissioned) by a qualified Edilkamin 
technician. 

In Italy, commissioning by an authorised technician 
is required by UNI 10683, and is recommended in all 
countries to ensure best results from the product.

This consists in:
•  checking the installation documents (declaration of 

conformity) and the quality of the installation itself;

•  calibrating the product to suit its actual application
• explanation to the end user and issue of 

complementary documentation (commissioning 
certificate)

Having the appliance commissioned properly ensures 
that it will operate to best effect and in complete safety.
Proper commissioning is required for activation of the 
Edilkamin warranty. The warranty is only valid in the 
country of sale of the product.
If the appliance is not commissioned by an authorised 
technician, Edilkamin will not provide warranty service. 
See the warranty booklet for details. The above terms 
do not affect the reseller’s legal responsibility for the 
legal warranty.

The warranty covers only demonstrable manufacturing 
defects and not, for instance, problems resulting from 
improper installation or calibration.

MEANING OF SYMBOLS

In some parts of the manual the following symbols 
are used:

INFORMATION:

 

failure to comply with these 
requirements will compromise 
product use.

PLEASE NOTE:

 

carefully read and understand the 
message in question, since failure 
to follow the instructions in it could 
cause serious damage to the 
product and put  the safety of those 
using it at risk. 

OPERATING SEQUENCE:

 

follow the instructions for the 
operations described

Содержание 809530

















































Отзывы: