background image

12

ENGLISH

Dear Sir/Madam
Congratulations and thank you for choosing our product.
Please read this document carefully before you use this product in order to obtain the best performance in complete
safety.

For further details or assistance, please contact the DEALER where you purchased the product or visit the TECHNI-
CAL ASSISTANCE CENTRES page on our website www.edilkamin.com.

NOTE

- After you remove the packaging, please inspect the unit for any damage or missing parts ("stay cool" handle, warran-
ty booklet, glove, technical data sheet).
In case of anomalies please contact the dealer where you purchased the product immediately. You will need to present
a copy of the warranty booklet and valid proof of purchase.

Commissioning/ testing
Commissioning and testing must be performed by an authorized Edilkamin Technical Assistance Centre. Failure to do
so will void the warranty. Commissioning, as specified in standard UNI 10683 (section "3.2") consists in a series of
controls performed on the installed fireplace in order to ascertain the correct operation of the system and its complian-
ce to applicable regulations.

To locate the Technical Assistance Centre closest to you, please ask your local dealer, call our toll-free number, or visit
our website www.edilkamin.com.

- Incorrect installation, incorrect maintenance, or improper use of the product, shall relieve the manufacturer from any
damage resulting from the use of this product.
- the proof of purchase tag, necessary for identifying the fireplace, is located:
- on the top of the package
- in the warranty booklet found inside the firebox
- on the ID plate affixed to the back side of the unit;

This documentation must be saved for identification together with the valid proof of purchase receipt. The data contai-
ned therein must be reported when requesting information and made available should servicing be required;

- All images are for illustration purposes only; actual products may vary.

The undersigned EDILKAMIN S.p.a. with head office headquarters at Via Vincenzo Monti 47 - 20123 Milan - Italy - tax code and VAT no.

 

00192220192

Declares under its own responsability as follows:
The wood-combustion fireplace listed below complies with Regulation EU 305/2011 (CPR) and the harmonised European Standard EN

 

13240:2001 + A2:2004 + AC:2006 + AC:2007

WOOD BURNING FIREPLACES, trademark EDILKAMIN, called TITANO 

UP

2

Year of manufacture: Ref. Data nameplate
Declaration of performance (DoP - EK 

1

75

): Ref. data tag plate

Also declares as follows:
the wood burning fireplaces TITANO 

UP

2

 are in compliance with the requirements of the European directives:

2006/95/EEC - Low voltage directive
2004/108/EEC - Electromagnetic compatibility directive

EDILKAMIN S.p.a. will decline all responsability of malfunctioning or damage to the equipment in case of unauthorized substitution, assem-
bly or modifications of any sort on the said equipment on the part of non-EDILKAMIN personnel.

Содержание 809490

















Отзывы: