EDILGRAPPA 230DE T10, Инструкция по эксплуатации и обслуживанию, Страница: 18 / 24

18
7 STORAGE AND RE-COMMISSIONING
7.01 STORAGE
In case of long periods of inactivity, proceed as follows:
-
Store the equipment in a clean and dry place accessible only to authorised personnel.
- Thoroughly clean the tool;
- Lubricate it with a thin layer of oil.
7.02 RE-COMMISSIONING
Before re-commissioning the machine after a long period of inactivity, perform the following
checks:
- check and if necessary eliminate any oil leaks;
- grease all parts which can be lubricated;
- check the hoses are intact;
- check for any missing, worn or badly positioned parts;
- check nuts and bolts are tightened.
8 MACHINE DISPOSAL
When disposing of the machine, the various materials must be separated.
The tool comprises the following groups of materials:
- ferrous materials
- copper
- plastic
Observe current legislation when sorting, storing, recycling or disposing of these materials.
Only for EU countries:
This electric tool features the following recycling symbol. Consistently with Directive
2002/96/EC on waste electrical and electronic equipment (WEEE), at the end of its useful
lifetime, this product must be disposed of separately in suitable collection areas and not
together with normal domestic waste. A benefit for the environment and an advantage for
all.