EDILGRAPPA 230DE T10, Инструкция по эксплуатации и обслуживанию, Страница: 16 / 24

16

In case of doubts during the maintenance interventions, to order spare parts or for
complex maintenance work, contact your authorised retailer.
5.01 CLEANING THE MACHINE
The cleaning operations must be performed using a dry cloth or compressed air. For
plastic surfaces the use of a cloth slightly dampened with water is allowed.
5.02 CHECKING THE SCREWS
Periodically, or every day in the event of frequent or prolonged work, make sure that all the
screws are perfectly tight.
FAILURE TO TIGHTEN LOCKING SCREWS CAN CAUSE SERIOUS DAMAGE.
5.03 GREASING
Periodically or daily (in the event of frequent or extended works) check that the central pin (
see ref. 1 in fig. 5 ) is appropriately lubricated.
To grease the pin, use lithium-based water-repellent grease and apply it with a manual
grease gun (see example in fig. 5), pumping the grease into the grease nipple located on
one of the two jaws (see ref. 2 in fig. 5).
Fig. 5